Tranaction ID Search
To locate the PREFERENCE volume or volumes where
a specific Transaction ID is defined, use F10 Transid Search
from the supervisor rules facility. The Transid Search is useful if
you wish to verify that a specific Transaction ID is defined within
PREFERENCE, or if you wish confirm that a Transaction ID does not
appear in more than one active volume. Use the Transid Search as
follows:
-
Access the
PREFERENCE type command line as supervisor.
-
Type "rbuild" and
press ENTER. When finished a prompt will appear stating "RULES
TABLE CONSTRUCTION COMPLETE".
-
Type "rules" and
press ENTER to access the Supervisor Rules Administration
screen.
-
Press F10 Transid
Search. A prompt should appear at the bottom of the screen
stating ENTER TRANSID NAME.
-
Enter the
Transaction ID that you wish to search for at the prompt and
press ENTER. Please note that the search is case-sensitive.
The follow display shows an
example of results of a Transid Search for EXMS:
VOLUMES CONTAINING TRANSIDS MATCHING EXMS 3:12 PM
=========================================================================
VOLUME (T)
(J) STATUS (DE)ACTIVATED LAST MODIFIED WRITER ID
----- --- ---
-------- ------------- ------------- ---------
jgscrn inactive 04/25/07 04/23/07
SUPERVISOR pinell ACTIVE
05/25/07 SUPERVISOR
The display shows that EXMS is defined in two
PREFERENCE volumes, jgscrn and pinell. However, pinell is an ACTIVE
volume (used in rules processing) and jgscrn is not.
If a specified transaction is not found, the
table will appear empty and the following message appears in the
message area:
NO
VOLUMES FOUND WITH SPECIFIED TRANSACTION DESCRIPTOR.
|
Order
Your Upgrade Today!