SumTotal Logo
Pathlore Mainframe Site
 
Technical Support
Zaps & Patches
Order Forms
Documentation
Online Documentation

Release Information

Product Memos

Frequently Asked
Questions


Technical Tips
Product Suggestions



Product Memos

PHOENIX and PREFERENCE 7.9.0 Software Compatibility with the CICS Transaction Server

July 28, 2008

Dear Customer,

Below is information on software compatibility for the PHOENIX and PREFERENCE release 7.9.0 system with the CICS Transaction Server.

There are no known compatibility issues with CICS Transaction Server releases prior to 3.1.  If you are upgrading to CICS TS 3.1, there is a required ZAP for PREFERENCE.  The tables below identify this change.  In addition program definition changes are required. The following tables identify these changes:

CICS TS
PHOENIX 7.9.0 Only
1.2
Perform steps in Procedure 1 below
1.3
Perform steps in Procedure 1 below
2.1
Perform steps in Procedure 1 below
2.2
Perform steps in Procedure 1 below
2.3
Perform steps in Procedure 1 below
3.1 Perform steps in Procedure 1 below

CICS TS
PREFERENCE 7.9.0 Only
1.2
Perform steps in Procedure 2 below
1.3
Perform steps in Procedure 2 below
2.1
Perform steps in Procedure 2 below
2.2
Perform steps in Procedure 2 below
2.3
Perform steps in Procedure 2 below
3.1(*) Perform steps in Procedures 2, 3 and 4 below

CICS TS
PHOENIX & PREFERENCE 7.9.0 Only
1.2
Perform steps in Procedures 1 and 2 below
1.3
Perform steps in Procedures 1 and 2 below
2.1
Perform steps in Procedures 1 and 2 below
2.2
Perform steps in Procedures 1 and 2 below
2.3
Perform steps in Procedures 1 and 2 below
3.1(*) Perform steps in Procedures 1, 2, 3 and 4 below

Note(*) Support is limited to CICS transactions using a COMMAREA.  Starting with CICS TS 3.1 the COMMAREA 32KB limit was replaces with new Containers and Channels Feature. CICS Transactions that have been updated to use the new Containers and Channels Feature are not yet supported by PHOENIX and PREFERENCE.

Procedures
1
Change program definitions to specify EXECKEY=CICS for the following programs:
CBECICS, CBECICSI, CBECICSP and CBEFCTS
2
Change program definitions to specify EXECKEY=CICS for the following programs:
CBECICSI, CBEFCTS, CBRCIA, CBRCIB, CBRCIC, CBRCID, CBRCIE, CBRCIG, CBRCIGC, CBRCIH, CBRCIP, CBRCIPC and CBRCDZ33
3
  • Copy program CBRCDZ33 to newname CBRCDZ64 on the CICS LOADLIB

  • Define program CBRCDZ64 to CICS with the same settings as CBRCDZ33

where "64" in the CBRCDZ64 module name corresponds to the CICS release associated with TS 3.1

4

Download from our web site and apply required ZAP S790011 ZAP S790011 to support CICS TS 3.1. 

Note: Previously listed required ZAP S790009 has been replaced by S790011.  No action is required concerning ZAP S790009 (i.e. you may leave it applied or not install it).

Thanking you,

Sincerely,

The PHOENIX and PREFERENCE Development Team


 

 

Submit your product suggestion.



Order Your Upgrade Today!


 

Get Adobe Reader